專業供應美國進口-石油與液態天然氣脫水與淨化專用分子篩

KidayaR 542HP MOLECULAR SIEVE

For dehydration and purification of gases and liquids

Product Description

KidayaR 542HP Molecular Sieve is a highly porous, high performance, crystalline aluminosilicate in spherical form. The pore openings in the crystals have a diameter of approximately 10A. Sphere size is a nominal 1/8” diameter (4X8mesh).

PRODUCT SPECIFICATIONS – Available upon request

	Typical Property	Unit	Typical Value
1	Total Volatile (1750℉)	%	2.0
2	Bulk Density	lbs./cu. Ft	42
3	H2O-Adsorption Capacity 80% r.h.250C	wt.%	27
4	CO2 adsorption Capacity 250 torr,250C	wt.%	17.5
5	Crush Strength	lbs	9
7	Screen Analysis
	On 3 mesh, wt.	%	0
	On 4 mesh, wt.	%	15
	On 8 mesh,wt.	%	97
	ON 20mesh,wt.	%	100

Recommended Applications
KidayaR 542HP Molecular Sieve is a high capacity, multi-purpose type 10A molecular sieve used for dehydration and purification of various hydrocarbon and non-hydrocarbon gas and liquid streams. KidayaR 542HP molecular sieve makes an excellent choice for the purification of fluids such as the removal of oxygenates, fluorides and sulfur compounds from isomerization feedstock.

Key features are:
• Maximum adsorption capacity for water
• High adsorption capacity for CO2
Maximum capacity for sulfur compounds and other polar compounds with effective diameters les than 10A

Packaging Information
KidayaR 542HP is supplied in:
300 lb. steel drums, 4 drums per pallet
1,800 lb. Super Sacks

Handling & Storage Recommendations
Product must be stored in a dry location to prevent pre-adsorption of water. Opened packages should be resealed to prevent contamination of the product. Whenever possible, rotate stock to use oldest material first. If stored properly, KidayaR 542HP molecular sieves have an indefinite shelf life, however, material packaged in Super Sacks should be retested for Total Volatiles after 12 months. Material in Drums should be retested after 48 months.

Health & Safety Information
Full EH&S information is available by requesting an MSDS from any Kidaya representative or by contacting our EH&S Department at (886) 2-2586-0043.

Other Information
The information contained herein is based on our testing and experience and is offered for the user’s consideration, investigation and verification. Since operating and use conditions vary and since we do not control such conditions, we must DISCLAIM ANY WARRANTY, EXPRESSED OR IMPLIED, with regard to results to be obtained from the use of this product. Test methods are available on request.

CONTACT SALES OFFICE IN TAIWAN
OFFICE ADDRESS:
Rm. 1, 11F., No.88, Sec. 3, Chongqing N. Rd., Datong Dist., Taipei City 103, Taiwan (R.O.C.)
TEL : (886) +2-2586-0043
FAX: (886)+2-2594-1697
www.kidaya-tec.com
MSN instant :Kidayaservice@hotmail.com.tw

 

 

隱私權聲明•法律條款•版權所有：喜田屋貿易公司 @2007