專業供應美國進口-石油與液態天然氣脫水與淨化專用分子篩
KidayaR 513 MOLECULAR SIEVE
For dehydration of Gases and Liquids
Product Description
KidayR 513 Molecular Sieve is a highly porous, high performance, crystalline aluminosilicate in spherical form. The pore openings in the crystals have a diameter of approximately 4A. Sphere size is a nominal 1/16” diameter ( 8x12 mesh).
PRODUCT SPECIFICATIONS – Available upon request
The following Typical Properties are given for informational purposes only, and are not to be interpreted as product or in-process specifications.
|
Property |
Unit |
Typical Value |
1 |
Compacted Bulk Density |
lbs./cu. Ft |
44.5 |
2 |
H2O-Adsorption Capacity |
wt.% |
23.5 |
3 |
Average Crush Strength |
lbs |
12 |
4 |
Total Volatile (1000℉) |
wt.% |
2 |
6 |
Bead Size |
U.S. mesh |
(4 × 8) |
7 |
Screen Analysis |
|
|
|
On 3 mesh, wt. |
% |
0 |
|
On 4 mesh, wt. |
% |
10 |
|
On 8 mesh,wt. |
% |
97 |
|
ON 20mesh,wt. |
% |
100 |
Recommended Applications
KidayaR 513 Molecular Sieve is a high capacity, multi-purpose type 4A molecular sieve used for dehydration and purification of various hydrocarbon and non-hydrocarbon gas and liquid streams
Key features are:
• Maximum adsorption capacity for water
• Maximum service life
Packaging Information
Grade 513 is supplied in:
- 300 lb. steel drums, 4 drums per pallet
- 1,800 lb. Super Sacks
Handling & Storage Recommendations
Product must be stored in a dry location to prevent pre-adsorption of water. Opened packages should be resealed to prevent contamination of the product. Whenever possible, rotate stock to use oldest material first. If stored properly, KidayaR 513 ?molecular sieves have an indefinite shelf life, however, material packaged in Super Sacks should be retested for Total Volatiles after 12 months. Material in Drums should be retested after 48 months.
Health & Safety Information
Full EH&S information is available by requesting an MSDS from Kidaya Sales representative or by contacting our EH&S Department at (886) 2-2586-0043
Other Information
The information contained herein is based on our testing and experience and is offered for the user’s consideration, investigation and verification. Since operating and use conditions vary and since we do not control such conditions, we must DISCLAIM ANY WARRANTY, EXPRESSED OR IMPLIED, with regard to results to be obtained from the use of this product. Test methods are available on request.
CONTACT SALES OFFICE IN TAIWAN
OFFICE ADDRESS:
Rm. 1, 11F., No.88, Sec. 3, Chongqing N. Rd., Datong Dist., Taipei City 103, Taiwan (R.O.C.)
TEL : (886) +2-2586-0043
FAX: (886)+2-2594-1697
www.kidaya-tec.com
MSN instant :Kidayaservice@hotmail.com.tw